hive.trade

robodino.org

Lasercutters & Lamps

http://robodino.org/post/66957929813/lasercutters-lamps

November 14, 2013. Here’s a few projects that have been made in the space recently:. Here’s Judit’s Hippo and Fox:. Max also finished his scratch-built lasercutter recently. Here’s it being used by one of our young members:. In Sydney: a communal space where geeks and artists brainstorm ideas, play games, work on collaborative projects, and share the cost of some great tools. Subscribe to our mailing list. Is a great way to get in touch with us. If you need a direct contact email the board.

robodino.org

What is a Makerspace?

http://robodino.org/define-makerspace

What is a Makerspace? In a more practical sense, a makerspace is a room or a building in which people with all different skill sets come together and bring interesting ideas to life collectively. A hackerspace is full of interesting things to see and be a part of, and visiting one never fails to bring out your own ideas. In Sydney: a communal space where geeks and artists brainstorm ideas, play games, work on collaborative projects, and share the cost of some great tools. Subscribe to our mailing list.

robodino.org

New space!

http://robodino.org/post/77997091270/new-space

February 27, 2014. The hackerspace has MOVED! After a lot of messing about, we finally moved shop and are settling in nicely to our new address, 10/27 bank st Meadowbank! It’s right across the road from Meadowbank station. We still have of work to do settling in but so far the new space has a much cleaner, brighter and friendlier vibe, so we are all excited and thankful it is over! Below is a time lapse I made of the unpacking. Housewarming to come soon! Reblogged this from robodinos. David L. Jones.

robodino.org

Membership pricing

http://robodino.org/membership

Our base membership rate is $40 per month. This can be paid month to month via reoccurring subscription through PayPal, bank transfer, or cash. PayPal is currently our preferred method. If you have any questions, contact treasurer@robodino.org. Paying 6 or 12 months in advance gets you a 10% discount. 216/6 months via PayPal. Subscriptions can be canceled at any time via the PayPal website. If you’d like to donate any amount of money to Robots and Dinosaurs for any reason (yay! You can use paypal: donate.

robodino.org

In which we make a wool carding machine for an...

http://robodino.org/post/66958275698/in-which-we-make-a-wool-carding-machine-for-an

November 14, 2013. In which we make a wool carding machine for an Alpaca. One of our members, Judit, had a bit of a challenge recently when she got an Alpaca fleece and needed to card it. Wool ‘carding’ is the process of teasing and aligning the fibres to remove knots, and it must be done before spinning the wool. Carding machines are vey expensive, but the actual carding brushes are fairly cheap, so we designed a laser-cut set of drums and frame to make our own machine:. Subscribe to our mailing list.

robodino.org

Gerard's Moulding Box

http://robodino.org/post/54630907895/gerards-moulding-box

July 05, 2013. Gerard’s Moulding Box. Here’s a project one of our members, Gerard, made recently:. Well, not so much assembled at the space, but certainly made made far more easily and elegantly with the help of the laser cutter :). The table is to help remove air bubbles from the condensation cure moulding rubber I’ve been using and it seems to work quite well. It’s just a small DC motor with an eccentric disc attached to the rotor, and clamped to the table with a bracket printed on an UP printer.

robodino.org

Today we have been making gears among other things

http://robodino.org/post/114196230653/today-we-have-been-making-gears-among-other-things

March 21, 2015. Today we have been making gears among other things. Submitted this to robodinos. In Sydney: a communal space where geeks and artists brainstorm ideas, play games, work on collaborative projects, and share the cost of some great tools. Subscribe to our mailing list. Is a great way to get in touch with us. If you need a direct contact email the board. These awesome people donate generously. To Robots and Dinosaurs:. David L. Jones. Designed by Artur Kim.

robodino.org

Robots and Dinosaurs

http://robodino.org/page/2

Robots and Dinosaurs is located in 10/27 Bank st, Meadowbank. We’re open Saturdays from about 11am and some weeknights, but you should check by asking on our mailing list. February 27, 2014. The hackerspace has MOVED! After a lot of messing about, we finally moved shop and are settling in nicely to our new address, 10/27 bank st Meadowbank! It’s right across the road from Meadowbank station. Below is a time lapse I made of the unpacking. Housewarming to come soon! November 14, 2013. November 14, 2013.

robodino.org

Ralph, the little robot who did!

http://robodino.org/post/113637868718/ralph-the-little-robot-who-did

March 15, 2015. Ralph, the little robot who did! RoboDino ran a robotics workshop on the weekend. It was a design from one of our members and comes in at less than $25 AUD! It was great fun and by the end of the day we had 15 little robots chasing each other around a line. More pictures inside! In Sydney: a communal space where geeks and artists brainstorm ideas, play games, work on collaborative projects, and share the cost of some great tools. Subscribe to our mailing list. To Robots and Dinosaurs:.