boyar-schultzsmt.com
Drill and Reamer Holders - Boyar-Schultz SMT
http://www.boyar-schultzsmt.com/drill-reamer-holders.htm
Division of Lester Detterbeck Enterprises Ltd. North Country Website Design. Drill and Reamer Holders. Floating holders are used for holding drills, reamers, and other cutting tools in screw machines, turret. Lathes, CNC lathes, and CNC turning centers. Model DC and DCR. Drill and Reamer Holders. Burnishing/Knurling Thread Rolling Tools. Single Function Tools / Accessories. Oscillating Drilling Tool Holder and Knee Turning. Dovetail Form Tool Blanks. Dovetail Shave Tool Blanks. Drill and Reamer Holders.
boyar-schultzsmt.com
Rapi-Change Tooling - Boyar-Schultz SMT
http://www.boyar-schultzsmt.com/rapi-change-tooling-system.htm
Division of Lester Detterbeck Enterprises Ltd. North Country Website Design. T he quick and simple low-cost way to boost. Productivity and increase machine utilization. A management tool for controlling costs RAPI-. CHANGE is a tooling system proven to help. Management gain and maintain closer control. Over the total cost of manufacturing. Lower cost per piece - higher productivity per. Faster job setups and changeovers - including use of. Reduced tooling expense and inventory costs-. And increase machin...
boyar-schultzsmt.com
Skiving Tool Holders - Boyar-Schultz SMT
http://www.boyar-schultzsmt.com/skiving-tool-holders.htm
Division of Lester Detterbeck Enterprises Ltd. North Country Website Design. Skiving Tool Holders - Brown & Sharpe Dovetail Form Tool Holder. Skiving Tool Holders for Brown and Sharpe Automatic Screw Machines. This holder can be used on either the front or back cross slide by changing the position of two nuts, so. There is no need for two different holders. Among the salient features is the possibility of setting the. Drill and Reamer Holders. Burnishing/Knurling Thread Rolling Tools. Skiving Tool Holder...
boyar-schultzsmt.com
Roller Rests - Boyar-Schultz SMT
http://www.boyar-schultzsmt.com/roller-rests.htm
Division of Lester Detterbeck Enterprises Ltd. North Country Website Design. Roller rests are used in screw machines, turret lathes, and CNC lathes to provide support for a workpiece. Undergoing a cross slide operation. Drill and Reamer Holders. Burnishing/Knurling Thread Rolling Tools. Single Function Tools / Accessories. Oscillating Drilling Tool Holder and Knee Turning. Dovetail Form Tool Blanks. Dovetail Shave Tool Blanks. Carbide Tipped Dovetail Blanks. Division of Lester Detterbeck Enterprises Ltd.
b-smachine.com
Chuck Levers from Forging - B&S Machine Services Inc.
http://www.b-smachine.com/parts-chuck-levers.htm
Division of Lester Detterbeck Enterprises Ltd. North Country Website Design. Chuck Levers from Forging. From the start, The Brown & Sharpe Manufacturing Co. required the best chuck levers. Possible for its screw machine. The requirement is to withstand several million. Deflections of up to 0.055”. After extensive trials, it was determined that chuck levers. From individual forgings provided the best metallurgy for this application. The grain. Service and even chucking pressure. Collets and Feed Fingers.
b-smachine.com
Clutch Lever Fulcrums - B&S Machine Services Inc.
http://www.b-smachine.com/parts-chuck-lever-fulcrums.htm
Division of Lester Detterbeck Enterprises Ltd. North Country Website Design. The more wear resistant the fulcrum, the better it will stand up to the chucking pressures. The. More wear resistant, the more the chucking pressure will be even and cause less strain on the. Front and rear bearings. That all adds up to longer life and less downtime with Brown & Sharpe. Fulcrums – unsurpassed for toughness and wear resistance. Precision production to the original tolerances means replacements are just like the.
b-smachine.com
About B&S Machine Services Inc.
http://www.b-smachine.com/about-us.htm
Division of Lester Detterbeck Enterprises Ltd. North Country Website Design. B&S Machine Services owns the exclusive right to manufacture Brown &. Sharpe Screw Machines, their replacement parts, plus Brown & Sharpe Collets. And Feeding Fingers. Parts are manufactured to the original specifications for. Dimensions, material and heat treating. They will perform and last like the. Parts that were in the machine when it was shipped from the factory. Purchasing from Brown & Sharpe saves you:. Purchasing from ...
boyar-schultzsmt.com
Tooling Components - Boyar-Schultz SMT
http://www.boyar-schultzsmt.com/tooling-components.htm
Division of Lester Detterbeck Enterprises Ltd. North Country Website Design. Box tools are used in the turrets of screw machines, turret lathes, and CNC lathes. They are. Recommended for turning diameters where straightness, accuracy and finish are of primary. Types of Machinery Using Boyar-Schultz Screw Machine Tooling:. All Brown & Sharpe Hand and Automatic Screw Machines,. Bardons & Oliver. Jones & Lamson. Warner & Swassey. Basically any turning type machine. Drill and Reamer Holders.
boyar-schultzsmt.com
Single Function Tools - Boyar-Schultz SMT
http://www.boyar-schultzsmt.com/single-function-tools.htm
Division of Lester Detterbeck Enterprises Ltd. North Country Website Design. Single Function Tools / Accessories. Screw Machine Cam Rollers and Pins. Drill and Reamer Holders. Burnishing/Knurling Thread Rolling Tools. Single Function Tools / Accessories. Oscillating Drilling Tool Holder and Knee Turning. Dovetail Form Tool Blanks. Dovetail Shave Tool Blanks. Carbide Tipped Dovetail Blanks. Division of Lester Detterbeck Enterprises Ltd. A division of Lester Detterbeck Enterprises, LTD.
SOCIAL ENGAGEMENT